products

Single Screw PS/PE Recycling Machine

Short Description:

Recycling machine can process PS/PE material and it is mainly used to recycle the high foam polystyrene and high foam polyethylene products. It is the ideal equipment to recycle the waste materials. It features compactstructure and easy operation.


Product Detail

Product Tags

Introduction

This design recycling machine is single screw and it can make the recycled material quality to be not better than double screws recycling machine. And its capacity is smaller than double screw recycling machine because one screw can enter less liquid material inside. At the same time, because it eat less material and it stay not too long time, so the heating time will be less and the recycling granules will not better than double screws recycling. Its advantage is easy operating. The ps waste scraps are mainly from your own fully automatic ps foam food box thermoforming machine last part or the semi-automatic ps foam food container thermoforming machine with cutting off machine for more scraps and also the not good products. All these scraps are generated from the thermoforming machine and it will be clean in your food box production plant.

Robot design food box thermoforming machine, tear apart design lunch box thermoforming machine and the semi-automatic fast food box thermoforming machine has 10-15 %waste ration and the stacking design food dish forming machine has 20% waste ratio. If we leave it away, it will be a waste and also not good to the environment.

So the recycling machine will be a good choice for reusing it.

We just need to crush all the waste scraps to be small scraps and enter into the recycling machine hopper, it will become liquid again and extruded as like noodles. After cooling and cutting, we can get the granules again.

Because there is rule for food box, food tray ect about the food grade and clean material. So we can use the recycling material to make egg tray, egg box, fruit tray, vegetables tray, drugs tray and the cosmetic tray etc. Because these trays are not for people eat and there is no too much requirement and it can be used for packing better.

Component

I. Hopper for crushed waste small scraps

J. 1#extruder for heating the scraps to be liquid state

K. Filter changer manual design to filter the impurities of the waste scrap material.

L. Mold to extrude the liquid material as like noodles

M. Water tank to cool the liquid noodles material to be hard

N. Brusher to clean the water of the hard noodle’s material

O. Rolling Cutter to cut the hard noodles to be small granules and pack it to box.

Techanical Data

Technical Parameter

Unit

ZLS-105

1#Extruder Diameter

MM

Φ105

Installation Power

KW

35

Capacity

Ton

0.8-1.5T/24Hour

Installation Dimention

M

6X3X1.5

Weight

Ton

1.5

Power Supply

380V50HZ(3Phase 380V 50HZ)

Working Flow

1

Product Details Picture

Scrap Winding Part (4)
Scrap Winding Part (1)
Scrap Winding Part (2)
Scrap Winding Part (3)

  • Previous:
  • Next:

  • Write your message here and send it to us