-
Products
Categories
Double Screws Recycling Machine (Pelletizer)
Recycling Machine
Granules Making Machine
Crusher
Pelletizer
Categories:
- Product Description
-
Double Screws Recycling Machine (Pelletizer)
Introduction
This design recycling machine is double screws and it can make the recycled material be better than single screw recycling machine. Because it can filter first and heat longer time to make liquid material at a better state to get better quality granules. And its capacity is larger than single screw recycling machine because two screws can enter more liquid material inside.
The ps waste scraps are mainly from your own fully automatic ps foam food box thermoforming machine last part or the semi-automatic ps foam food container thermoforming machine with cutting off machine for more scraps and also the not good products. All these scraps are generated from the thermoforming machine and it will be clean in your food box production plant.
Robot design food box thermoforming machine, tear apart design lunch box thermoforming machine and the semi-automatic fast food box thermoforming machine has 10-15 %waste ration and the stacking design food dish forming machine has 20% waste ratio. If we leave it away, it will be a waste and also not good to the environment.
So the recycling machine will be a good choice for reusing it.
We just need to crush all the waste scraps to be small scraps and enter into the recycling machine hopper, it will become liquid again and extruded as like noodles. After cooling and cutting, we can get the granules again.
Because there is rule for food box, food tray etc. about the food grade and clean material. So we can use the recycling material to make egg tray, egg box, fruit tray, vegetables tray, drugs tray and the cosmetic tray etc. Because these trays are not for people eat and there is no too much requirement and it can be used for packing better.
Component
A. Hopper for crushed waste small scraps
B. 1#extruder for heating the scraps to be liquid state
C. Filter changer manual design to filter the impurities of the waste scrap material.
D. 2#extruder to heat the liquid state material to be a good quality
E. Mold to extrude the liquid material as like noodles
F. Water tank to cool the liquid noodles material to be hard
G. Brusher to clean the water of the hard noodles’ material
H. Rolling Cutter to cut the hard noodles to be small granules and pack it to box.
Techanical Data
Technical Parameter
Unit
ZLS-150/120
1#Extruder Diameter
MM
Φ150
2#Extruder Diameter
MM
Φ120
Power
KW
42
Capacity
Ton
4-5T/24Hour
Installation Dimention
M
6X3X1.5
Weight
Ton
2.5
Power Supply
380V50HZ(3Phase 380V 50HZ)
Working Flow
Product Details Picture
What is the material to produce PS Foam Food Box and EPS Foam Cups?
The PS Foam Food Box Material is GPPS (General Purpose Polystyrene) Granules. It is foamed by Butane Gas. So there is butane gas pump needed to inject the gas for foam.The EPS Foam Cups material is EPS (Expandable Polystyrene) Granules. It is foamed by steam and air. So there is boiler and air compressor needed.
Where can we get the material to start this PS Food Box and EPS Foam Cups Project?
You can search it in your local, your nearby country or we can recommend you supplier in china. You can compare the price and quality to choose the best one.
What is your advantage?
Firstly, We have good quality machine and get good reputation from our client. We passed the client’s test and get more orders from them again and again. That is Win-Win strategy. Second, we have good and long times after-sales service. This is the important part because client have too many questions and they need technician to assist then resolve the problem ASAP and they can meet with many questions because they are not very familiar with the new machine.
How can we confirm the model of the machine we can need?
Can confirm you budget and we recommend you the best proposal.You can choose the products you want to produce and tell us the size and your requirement to the capacity per hour/day/month. We will calculate and recommend the model for you.We can send you our client’s factory machine running video and you choose the one you like and confirm which design you need.
Where is your factory? How can I get there?
We are located in Longkou Yantai City, Shandong Province. The nearest airport is Yantai Penglai International Airport. From Guangzhou Baiyun Airport to us need 4 hours and from Beijing airport to us need 2 hours and from shanghai airport to us need 2 hours too. We can pick you up to our factory. From airport to our factory need 45minutes by driving.
Please contact us in time to get your exclusive offer.
PS Foam sheet extruder, PS foam fast food box/Lunch Box/Take Away Food box making machine, Thermoforming machine, plastic packing machinery EPS Cups Thermoforming Machine integrating independent research and development, production, sales and service.
Tel
Address
East of Villiage DaTianZhouJia, Hi-Tech Industrial Zone, Longkou City, Shandong Province, P.R.China
